In new home installations, our Beam Dealer can provide quotes based on your architectural plans. They will engage in a detailed discussion to understand your unique requirements. Typically, you'll be presented with two options: a comprehensive system installation featuring various Power Units, and an alternative for ducting installation alone. The cost of ducting installation is typically around one-third of the total system cost, varying depending on the intricacy of the house under construction. Ducting installation takes place during the framing stage of construction, ensuring a seamless integration into your new home.
Sometimes sections of the ducting have to be progressively installed as the project takes shape.
In cases where ducting needs to be installed beneath a concrete floor, it's vital to ensure that the LBP Builder overseeing the project is informed about your system installation plans. Effective coordination between our installer and the builder is key, with the builder typically scheduling our installer's involvement alongside the electrician and plumber before wall linings are added, as per the agreed-upon timeline.
The window of opportunity to get the ducting installed, is a relatively short period during the total time of the construction.
The number of Inlet valves required is dictated by the size of the house. Discuss the positions with your Beam Dealer
The Inlet valves are normally installed at the same height as the electrical power points.
When the house is finished or when the priority is right, we will commission the System for you.
A Vacpan or Wally Flex can be installed from the main ducting line.
Contact us
For over 65 years, BEAM has been a leading manufacturer of central vacuum systems with a long line of innovative products to raise the bar.
Contact us
